W-60-20-Saddle Miter Pipe Cutter

Saddle-Miter Pipe Cutter

This is the machine to buy if you are cutting pipe 12 inches and below, such as stair rails, machine frames or plumbing. Cuts perfect 90 degree saddle joints to connect any size branch to any size trunk, including 1:1 matches. Miters can be set to any practical angle. This machine will save you hours of labor.

The W-60-20SM cuts straight cuts, miters, and 90 degree saddles on pipe up to 12". Set the cam using the chart on the side of the machine to produce the shape desired. This machine comes standard with an oxy fuel torch that utilizes a Victor style 3-101 size torch tip. The torch can be rotated to produce the desired weld bevel. Comes standard with Rotary Ground and wired for plasma. Optional accessories allow you to use a machine plasma system in addition to oxy-fuel.

Diameter:������� 1-1/4 �12 in.
Length:����������� Depends on carriage
Volts:�������������� 110 V
Amps:������������� 4
Shipping weight:��� 170 lbs

 

Watts Specialties Inc Logo

W-60-20-Saddle Miter Pipe Cutter