Other Information:

Product Information
Product Manual

A real standout anywhere difficult end preps are required. Make fast work of pipe and tube from 1.91” through 6.625” O.D. (48.5mm – 168mm) and flanges from 4” through 12” O.D. (101.6mm – 304.8mm), regardless of material wall thickness.

A primary advantage of the SDB-206 is its compact, lightweight design, which makes it particularly easy to handle. In addition, it only requires 2.25” (57.15mm) radial clearance—making it the ideal tool for use in tight places.

What other machine of this type can perform as many different jobs as the SDB-206? Complete finishing capability to bevel, counter bore, face and multiple-angle bevel. In addition, an optional flange facing attachment makes easy work of flange facing and grooving.

Features:
EASY OPERATION
• Convenient "fail safe" on/off motor valve
• Adjustable hand grip speed control
• In-feed hand wheel with indices for precise measurement
• Adjustable dual-key design makes tool feed easy, absorbs torque, reduces operator fatigue and increases safety
• Powerful 2.5 HP air motor easily machines .75" (19.05mm) wall stainless pipe or tube
• Set up square in elbows, tees and valves with adjustable three-leg fitting mandrel

FAST SETUP
• Set up and operate from storage case to pipe in under 10 minutes
• "Quick change" extension legs use captivated fasteners to mount firmly to mandrel
• One adjustment, universal three-leg chuck automatically centers and squares the machine in pipe I.D.
• Install or adjust tool bits in seconds