Pipe Cutting and Beveling Machines RA 41 Plus
Cutting and beveling tubes and cutting elbows made of high-alloy steel (stainless steel), low- and unalloyed steel, casting materials and non-ferrous metal in just seconds, using the superior «Planetary Cutting Technology».
Your benefits:
- Square, burr-free and cold machining process
- Deformation-free clamping system, especially applicable for thin-walled tubes
- Ideal for simultaneous cutting and beveling
- Fast dimension adjustment
- Sturdy design with powerful drive
- Optimum preparation for automated welding processes
- Clamping jaws made of aluminum
RA 41 Plus
|
 |
 |
 |
 |
|
|
||
The above-mentioned RA machine is also available in the following version:
RA 41 Plus H
Pipe Cutting and Beveling Machine with additional intermediate gear for lower cutting speed and more torque for high-performance pipes e.g. Hastelloy, Inconel, Duplex, high-alloy steel (stainless steel) and titanium alloys.
| Application range | [mm] | [inch] |
|---|---|---|
| Tube OD (tubes) | 10 - 120 | 0.394 - 4.724 |
| Tube OD (elbows) | 30 - 120 | 1.181 - 4.724 |
| Wall thickness (depends on material) | 0.6 - 7 | 0.024 - 0.276 |
| Tube ID min. (saw blade-Ø 68 mm/2.677 inch) | 16 | 0.630 |
| Tube ID min. (saw blade-Ø 80 mm/3.150 inch) | 4 | 0.157 |
