Pipe Cutting, TechSouth Inc

Model FF 424

Flange Facing Machine for facing raised and flat face flanges from 4” I.D. to 24” O.D. (101.6mm – 609.6mm).

Other Information:

Features:

Only one operator required to set up and operate
Modular design—Converts from a flange facing machine to a pipe beveling machine in minutes
Mounting legs require less than 1.75” (19.1mm) straight run for rigid machine mounting
Cast aluminum housing makes it tough yet lightweight
Large bearing load diameters and tapered roller bearings for smooth operation and long life
Rigid tool post design and exacting tool geometry for precise machining finish
I.D. mounted, three-leg, single-action chuck provides fast setup in any position
“Slip-on” alignment fixture automatically squares machine to flange face
“Quick change” mandrel system packaged for fast selection and installation

CL-124 Pipe Cutter	W-60-12 Pipe Cutter
W-132-LPSM Pipe Cutter	W-50 Destructive Weld Tester
W-116-LPSM Pipe Cutter	W-40-A Track Burner
W-132-LPSC Pipe Cutter	W-90 Combination Pipe-Cutter/Positioner
W-116-LPSC Pipe Cutter	W-70 Welding Positioner
W-60-12-SM Pipe Cutter

Guillotine Pipe Saw	TC 4.5 Tube Cutoff Saw	SDB 206/2
Goliath Guillotine	Tube Lathe TL 2.0 & 4.0	SDB 412/2
UPC Utility Pipe Cutter	Utility Super C	EB Weld Excavation and Tube Beveler
Trav-L-Cutter	Low Profile CB Beveler	Panel Pro Panel Saw
LCSF Low Clearance Split Frame	Low Profile LB Beveler	Fin Tube Cutting System
Pipeline Split Frame	Low Profile MB Beveler	Flange Facing Model FF 206
Socket Weld Removal System	Low Profile SB Beveler	Flange Facing Model FF 313
LPM Low Profile Split Frame Machine	SDB 103/3	Flange Facing Model FF 424

Drill: KBM 32Q	Grinder: 5" Angle Grinder	Nibbler: BLK 1.6	Hacksaws: Pneumatic and Electric
Drill: KBM 50QX	Grinder: 5" & 6" Angle Grinders	Nibbler: BLK 1.3CS	Hacksaw Accessories
Drill: KBM 52U	Grinder: 7" & 9" Angle Grinders	Nibbler: BLK 3.5	Hacksaw Blades
Drill: Bits, Pins & Adaptors	Grinder: 5" Angle Grinder/Sander	Nibbler: BLK 5.0
Drill: Accessories	Grinder: MSh 636-1 Die Grinder
Drill: Tapping Accessories	Grinder: AHSL 636c Die Grinder