Accessories for BRB 2, BRB 4
|
Tool support Ř 90 mm (3.543 inch)
For Mandrel Ř 31.5 mm (1.240 inch).
|
Tool holder WH
For different wall thicknesses and weld prep profiles.
With Torx screw.
|
Multifunctional tools MFW
For different wall thicknesses and weld prep profiles. Two- or four-sided tool bit with high-performance Balinit® Futura protective coating against tool wear. For high-alloy steel (stainless steel) low-alloy steel, carbon steel and cast iron pipes.
|
|
Mobile air unit DWE 10
Lubricator and air filter adjustable pressure range 0 – 10 bar.
Flow max. 2.6 m3/min (92 cfm). Air inlet side: ˝" clutch coupling (DIN 3481).
Air outlet side: ˝" quick coupling.
|
Air hose with quick coupling
To connect the REB or BRB machine with the mobile air unit DWE 10.
Length: 4 m (15.748 in);
ID 19.1 mm (0.752 in).
Air inlet side: ˝" quick coupling. Air outlet side: 90° angle screw with ˝" quick coupling and a nipple to screw into the speed regulation handle on REB or BRB.
|
Cutting lubrication KSS-TOP
The water soluble, fully synthetic cooling fluid extends the tool life of the tool bits.
Contains no hazardous substances. Fulfils DVGW requirements, regarding drinking water, work sheet W 521. Protects against corrosion, even during longer periods of downtime.
|
