TechSouth Saw Guides

½" - 6" Tube & Pipe Sizes Available
Patent Pending Design

1/2 inch - 6 inch saw guides TechSouth Saw Guides

Features
Easy Setup The wing nut design allows the guide to be locked onto the pipe without the use of external devices. Just wrap the guide around the pipe and tighten the wing nut for the cutting operation.
Rollpin A hardened solid pin is inserted into the guide just below the finished cut line that will stop the saw blade from cutting into the guide. If the saw blade comes in contact with the pin, the pin will spin and not damage the saw blade or the guide.
Nickel Plated The hardened steel saw guide is neickel plated to insure non-contamination of the pipe or tube.
Double Slot (Patent Pending) Double slot guide has two slots. Narrow for a portaband and a wider one for a sawzall blade. This is to insure that the tolerances are kept tighter on the cut on the ½" thru 3.5" sizes. The 4" and 6" have single slots.
Rounding The design of the guides also allows it to be used as a rounding clamp in certain applications.
Sizes Sizes are available from ½" to 6" in both pipe and tube sizes
Pipe Saw Guide 1 Pipe Saw Guide 2
Pipe Saw Guide 3 Pipe Saw Guide 4

Pivoting screw and wing nut to allow quick mounting without the use of additional tools.

All sizes available from ½" to 8" pipe and tube.

Pipe Saw Guide 5
Tube Sizes Pipe Sizes
Size Part Number Size Part Number
½" Tube SG½T ½" Pipe SG½P
¾" Tube SG¾T ¾" Pipe SG¾P
1" Tube SG1T 1" Pipe SG1P
1-½" Tube SG1-½T 1-½" Pipe SG1-½P
2" Tube SG2T 2" Pipe SG2P
2-½" Tube SG2-½T 2-½" Pipe SG2-½P
3" Tube SG3T 3" Pipe SG3P
4" Tube SG4T 4" Pipe SG4P
6" Tube SG6T 6" Pipe SG6P